HQST 30A 12V/24V PWM Flush Mount Solar Charge Controller Solar

• Our Store
• Feedback
• Contact Us

【Aesthetically Clean Installation】This HQST 30A PWM solar charge controller with flush mount capabilities is designed to be seamlessly mounted onto a flat wall surface, producing an aesthetically clean, and integrated look.【Negative Ground, Safe Charging】This is a commonly used negative-ground controller, suitable for most vehicle and solar off-grid systems. Equipped with multiple protections, including over-discharge, over-voltage, over-current, reverse current, short-circuit, and reverse polarity, this 30A PWM solar controller prevents damage from installation mistakes or system faults.【Compatible with Most Systems】Automatic battery recognition for 12V and 24V AGM, GEL, Flooded, and Sealed Lead-Acid batteries. Lithium batteries can be set manually. Supporting 12V (up to 450W) and 24V (up to 900W) solar systems, this solar controller can be widely applied on motorhomes, sheds, boats, water pumps, and more.【Smart PWM Charging】Utilizes the three-stage charging (Boost, Float, Equalization) algorithm to regulate the flow of electricity to achieve optimal battery (lead-acid) performance and longevity. Two-stage charging (Boost and Float) for lithium batteries.【Easy to Use】The backlit display allows you to see key information clearly, even in a dark environment. The USB-A port supports charging current up to 5V/1A for your mobile device, like a mini fan or smartphone. The compact design is ideal for areas with limited space.

 

• HQST 30A 12V/24V Flush PWM Solar Charge Controller
• Flush design: Aesthetically clean and integrated installation
• Wide compatibility: 12V/24V LiFePO4 and lead-acid (SLA, AGM, GEL, FLD) batteries
• Negative ground: Compatible with more vehicle systems
• Smart PWM charging: Provides optimal battery performance and longevity
• Multiple protection: Prevents damage from installation mistakes or system faults
  
• What's in the box:
• 1 x Charge Controller
• 4 Pairs x Mounting Screws (M4 12mm Bolts, M4 Nuts)
• Dimensions: 6.69 x 5.12 x 1.89 in/170 x 130 x 48 mm
• Weight: 0.99 lb/0.45 kg
• Terminals Size: 8 AWG to 14 AWG









• Rated System Voltage: 12V/24V DC
• Rated Charge Current: 30A
• Max PV Input Power: 12V/450W max, 24V/900W max
• Max PV Input Power: 55V max
• Ground Type: Negative
• Operating Temperature: -31°F to 113°F (-35°C to 45°C)
    
• Measure Your Controller
• Measure the length and width of the flush mounting part. Cut a board or piece of paper of the same size.
  
• Mark the Installation Area
• Use the cut paper or board as a template to mark and reserve the installation area on the mounting wall. Slightly longer and wider than the measurements to ensure easier mounting.
  
• Mount Your Controller
• Affix the charge controller to the mounting wall with the included four pairs of mounting screws.
                               

 
 

You may like

• HQST 200W Monocrystalline Panel and Y ConnectorsN new

• HQST Fuse N new

• HQST Z Brackets Mounts N new

• HQST MPPT 40/20A Controller N new

On Sep 20, 2022 at 02:33:40 PDT, seller added the following information: